Results 1 to 4 of 4

Thread: Yaesu FT-70D Memory Bank Setup and Scanning

  1. #1

    Default Yaesu FT-70D Memory Bank Setup and Scanning

    Hello,
    Question: Memory Bank Setup and Scanning

    How do I scan from main channel list, ignoring channels that are in my assigned channel Bank 1?

    Example, I have 10 channels entered I like to scan most everyday, however I also have approx 20 channels entered (addressed) into my Bank 1 Memory.

    I can scan all 30, or I can go to Bank 1 and scan just the 20 in there.

    When I lock out these 20 "Bank 1" scan from my main 30 channel entries outside the No.1 bank with a solid arrow on display, it also stops them from scanning when in Bank 1.

    I want to be able to have main channels that are not registered in any bank numbers for scanning, then be able to switch at anytime to anyone of my many memory banks for just a scan of whats in each of

    these banks.

    How can this be accomplished? I hope that my question isn't to confusing and makes sense.
    Last edited by Mike K; Mon 2nd Sep 2019 at 01:09.

  2. #2

    Default

    Try putting each group of frequencies in a separate Memory Bank, then just select the bank you want to scan. Or "no bank" if you want to scan everything. You can lock out individual memory channels within abank if there's stuff you don't want to hear.

  3. #3

    Default

    Quote Originally Posted by K6CPO View Post
    Try putting each group of frequencies in a separate Memory Bank, then just select the bank you want to scan. Or "no bank" if you want to scan everything. You can lock out individual memory channels within abank if there's stuff you don't want to hear.
    I cant seem create any more Memory Banks
    When using ADMS Software, and I checkbox (select) frequencies I already have loaded. After uploading the file to to the radio with channels check-boxed to be in various banks, no banks can be located or selected by multiple presses of the band key on the radio. Is there some sort of bug in the firmware?
    I would assume after assigning multiple frequencies to various banks “by check-boxing bank number I want the given freq to be in”, that now the radios menu should show these various banks when Band Key is pressed. No banks seem as if created and cannot be accessed through Band key presses and rotation of knob.

    Thanks for your help.

  4. #4

    Default

    Quote Originally Posted by K6CPO View Post
    Try putting each group of frequencies in a separate Memory Bank, then just select the bank you want to scan. Or "no bank" if you want to scan everything. You can lock out individual memory channels within abank if there's stuff you don't want to hear.
    Having issues creating banks and being able to have them show when band button is pressed.
    Putting memory channels in bank 1, 2, 3 etc by checkmarking in ADMS Software and uploading, no banks are showing up when pressing Band button on transceiver. Cannot create or find banks manually either per manual.
    What gives, is there a bug in the firmware?
    Just got this radio new from Gigaparts last month. This problem of not being able to create memory banks and access each for scanning separately has me very frustrated!

    Thanks anyone that can help.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •