Results 1 to 3 of 3

Thread: FT-450D ALC meter operation.

  1. #1

    Join Date
    Feb 2018
    Location
    North Carolina
    Posts
    2

    Default FT-450D ALC meter operation.

    I wrote Yaesu regarding the ALC meter function of the FT450D. The ALC meter does not work the same as a normal ALC meter we are used to.
    On a typical radio, you want to avoid the ALC from coming on. So you adjust the audio input (Mic) so the ALC verily moves, if at all.

    HOWEVER the FT450D having only 3 setting for the Mic gain the ALC works a bit different. You want to see the ALC meter moving on voice peaks to the upper 3rd of the meter range. Here is the response from yaesu..."73" N8QZH

    "Hello Matthew.

    Thank you for contacting Yaesu regarding your FT-450D.

    You are right, the ALC is a little different to other radios.

    There are only three mic gain settings as listed below.

    If you have the gain set correctly the alc. will look after itself.

    The higher it goes the more power you are putting out.

    As it gets to the limit of the scale it automatically starts to lower the gain to keep the power out within limits.

    All you need to do is talk the meter up towards the top of the scale."



    .....N8QZH

  2. #2
    Super Moderator 2E0FVL's Avatar
    Join Date
    Feb 2010
    Location
    Tangmere, Chichester, West Sussex, United Kingdom
    Posts
    566

    Default

    Handy to know, Cheers.
    Pete - 2EFVL
    The QRM Formally Known As M6PAP!!
    www.selseylifeboats.co.uk
    www.amberleymuseum.co.uk

  3. #3

    Join Date
    Jan 2015
    Location
    UK
    Posts
    12

    Default

    I know this is going back a bit but I have questioned the ALC opperation.

    On my quite new 450d...if I use FM or my key on CW...the ALC meter over reads by around 25%...to me this is going to overload the final.

    Any ideas guys...the right hand side toward the front of the radio get quite warm even on a short SSB voice.

    By the way....the ALC on voice it within limits.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •