Results 1 to 6 of 6

Thread: Listening to CW

  1. #1

    Join Date
    Apr 2017
    Location
    Southampton
    Posts
    8

    Default Listening to CW

    Hi
    I'm trying to listen to some morse on 40 Metres for practice but when ever I find a operator sending a bit slower (15 wpm ish) so I can try and write some down I get other morse operators breaking in . I have a Alinco DX SR9 transceiver which has CWU and CWL settings and a narrow filter but I can't find I can easily hear one station without hearing others. Perhaps this is why people spend a lot more on kit :-)
    Cheers
    Nev

  2. #2
    Super Moderator 5B4AJB's Avatar
    Join Date
    Mar 2008
    Location
    Meneou, Cyprus
    Posts
    1,882

    Default

    Maybe you could try building a narrow audio filter, they're pretty good on top of narrow I.F. filters.

    Just had a quick image search on google and there are tons of circuits, I recommend a simple coils & caps' one first, before you go digital.

    Another neat trick I saw once was simply a cardboard tube cut to a particular resonant frequency placed over the speaker!

    [edit] if you're quick, there's a couple of Datong audio filters on ebay starting bid at $1 - I use one myself, in fact it was one of the first bits of kit I ever bought...
    Last edited by 5B4AJB; Fri 12th May 2017 at 07:44.

  3. #3

    Join Date
    Apr 2017
    Location
    Southampton
    Posts
    8

    Default

    Thanks for your reply 5b4ajb I will have to look into doing that. Would I be correct in thinking that more expensive radios already have these filters ?
    Many thanks
    Nev

  4. #4
    Super Moderator 5B4AJB's Avatar
    Join Date
    Mar 2008
    Location
    Meneou, Cyprus
    Posts
    1,882

    Default

    Modern transceivers usually have audio filter options, basically graphic equalisers for the received and transmitted audio.
    There's no reason you can't add a graphic equaliser to an old valve radio, apart from winding up all the OM

    If your radio has an I.F. shift or other options, see what difference that does to the incoming CW...

  5. #5

    Join Date
    Jun 2016
    Location
    Western Massachusetts
    Posts
    1

    Default

    In the February issue of QST magazine (page 43) there is a great article on how to make a resonant speaker out of PVC pipe for very short money. I haven't tried it but I hope to soon.

    I have encountered the same problem in my listening experience as well. I just figured out this week that the my speaker, just as it is, has a resonant frequency of about 500 Hz. I started out listening with the tone set at 700Hz and that wasn't working for me so I changed the tone to 600Hz. 600Hz was better but I then started moving my rit to a lower frequency where it sounded better. I used an app on my phone to find out what the tone was that I could hear best and I reset my side tone to 500Hz which is much better for my rig. I think this means that my speaker is resonant at 500Hz. My transceiver is an Icom IC718.

    Because your rig has a detachable front face, If you wanted to try something just for the fun of it you could put the face flat on a desk and place a toilet paper tube or paper towel tube on top of the speaker. you can play with the length of the tube and possibly make the tube resonant to the tone you are using. You’ll probably find it very inconvenient to operate the rig with the faceplate flat on the desk top.

    None of these solutions will help with filtering out other signals but it can help make the other signals less significant.

    KC1FLN

  6. #6

    Join Date
    Apr 2017
    Location
    Southampton
    Posts
    8

    Default

    Hi Clcurtin9 many thanks for the reply. Yes the front of my radio can come off and connect to the back via a Cat5 cable I believe although I haven't done this yet.
    I will Google this article you mentioned and have a look.
    Have a great weekend mate.
    Nev

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •